<?xml version="1.0" encoding="utf-8"?>
<response>
  <error>0</error>
  <rss version="0.91">
    <channel>
      <title><![CDATA[Satisfaction]]></title>
      <link>http://electronics.digitalintuition.com/Home/tabid/170/EntryId/291/Satisfaction.aspx</link>
      <description><![CDATA[

The drill pattern in the above piece of copper clad board is less than two inches on a side.  Probably about 1.75 inches.  You will notice that the holes are perfectly aligned, but there is no vis ...]]></description>
      <language>en-US</language>
    </channel>
  </rss>
</response>